Download Installation Instructions Here

WARNING!!!
Image 1 shows how the copper connectors are supposed to look.

Image 2 and Image 3 show damaged copper connectors, which happen when the units are pushed together with excessive force.


If two units do not seem to fit together easily, double-check that the connectors are accurately lined up, or try using a different lamp. Do not force the connection. Test the entire light set with a multimeter before hooking it up to an electrical source and before mounting it to the ceiling.
It is recommended to completely read this manual before assembling the product.
Please carefully read the “Circuit Diagram” before assembling

Honeycomb LED light system Parts List
| No. |
Name |
Specification |
QTY |
Unit |
| 1 |
tubes |
Size: 440*20mm Power: 6w |
52 |
pieces |
| 2 |
tubes |
Size: 1185*20mm Power: 16w |
12 |
pieces |
| 3 |
connectors |
90° 2-way white |
3 |
pieces |
| 4 |
connectors |
180° 2-way white |
8 |
pieces |
| 5 |
connectors |
T-shaped 3-way white |
1 |
pieces |
| 6 |
connectors |
120° 2-way white |
26 |
pieces |
| 7 |
connectors |
120° Y connector white |
18 |
pieces |
| 8 |
Cable |
0.3m 1-end |
3 |
pieces |
| 9 |
installation instruction |
– |
1 |
pieces |
Honeycomb LED light Technical Data
| Voltage |
AC220V |
| Power |
504W |
| Current |
4.2A |
| Luminous Flux |
110-120lm/w |
| CRI. |
>90 |
| CCT. |
6500K (White) |
Assembling instruction
1. Put all the lamps and connectors on the ground (as in the following picture).
1.2m lamps for the outline, 0.44m lamps for the inner structure, and the position of different connectors as the following picture shows:

Pink O for 180° 2-way connectors 
Yellow O for L-shaped 2-way connectors 
Blue O for 120° 2-way connectors 
Red O for Y-shaped 3-way connectors 
Green O for T-shaped 3-way connectors 
2. Connect the tubes (Please be careful while connecting tubes with the connector, or the copper needle in the connector would be damaged)

Honeycomb LED light Circuit Diagram

Caution!
1. About the cable:
Red wire——Live Line
Blue wire——Null line
Yellow wire——Earth Line or Ground line
2. There are only 5 points for cable connection of the whole structure, parallel connecting the 5 cables and wiring to AC220V
3. TEST BEFORE FIXING TO THE CEILING.
4. Please install it with a professional electrician.

Honeycomb LED light mounting instruction
How to fix it on the ceiling?
